h2Head and block resurfacer Comec RP1000
Price: Call
Share
| 
| 
|
Mr. Vui
0944755799
| | |
Mr. Định
0968776499
| | |
Mr. Thuyên
0963829640
| | |
Nhân Võ Đình (HCM)
0967161443
| | |
Lê Thị Thanh Hương
0979898586
Head and block resurfacer Comec RP1000
The RP1000 is a resurfacing machine for cylinder heads and blocks of cars and trucks, as well as for all flat surfaces requiring a finished and accurate mating surface.
All machine parts, like the base, the table, the column and the head are made of widely ribbed cast iron of the best quality, thereby offering highly rigid and sturdy features.
The table feed is operated through a recirculating-ball screw that is extremely precise even at slow feed speeds. A frequency inverter controlling the screw is attached to the motoreducer to offer different speed feed that can be widely adjusted with a potentiometer.
Another inverter adjusts the spindle speed, in order to get the ideal cutting speed at all times and according to the different cutting systems, like abrasive sectors for the grinding of cast iron or aluminium cylinder heads with pre-chambers, the tool for aluminium resurfacing or the CBN-PCD toolholder plate for high-speed resurfacing.
A conveniently located digital display shows the rotation speed.
For an easy and safe use of the machine, all control commands are located on a rotating control panel that can be adjusted to every operator. Moreover, in order to supply an efficient product, the machine's standard equipment includes the rapid movement of the head, an efficient cooling system complete with a settling tank, and a wheel dressing assembly with diamond dresser.
Useful accessories are also available upon request, such as the adjustable set-up fixture for cylinder heads, the V-block mounting kit, the rotating backing pad for the grinding of flywheels, clutch friction plates or brake discs.
ONLY GRINDING VERSION:
ONLY M VERSION:
Accessories and spare parts
The RP1000 is a resurfacing machine for cylinder heads and blocks of cars and trucks, as well as for all flat surfaces requiring a finished and accurate mating surface.
All machine parts, like the base, the table, the column and the head are made of widely ribbed cast iron of the best quality, thereby offering highly rigid and sturdy features.
The table feed is operated through a recirculating-ball screw that is extremely precise even at slow feed speeds. A frequency inverter controlling the screw is attached to the motoreducer to offer different speed feed that can be widely adjusted with a potentiometer.
Another inverter adjusts the spindle speed, in order to get the ideal cutting speed at all times and according to the different cutting systems, like abrasive sectors for the grinding of cast iron or aluminium cylinder heads with pre-chambers, the tool for aluminium resurfacing or the CBN-PCD toolholder plate for high-speed resurfacing.
A conveniently located digital display shows the rotation speed.
For an easy and safe use of the machine, all control commands are located on a rotating control panel that can be adjusted to every operator. Moreover, in order to supply an efficient product, the machine's standard equipment includes the rapid movement of the head, an efficient cooling system complete with a settling tank, and a wheel dressing assembly with diamond dresser.
Useful accessories are also available upon request, such as the adjustable set-up fixture for cylinder heads, the V-block mounting kit, the rotating backing pad for the grinding of flywheels, clutch friction plates or brake discs.
Standard equipment
- Adjustable spindle speed complete with digital read-out
- Adjustable table feed
- Table with recirculating-ball screw
- Fast motorized head feed
- Manual/Continuous/Automatic working modes
- Turning control panel
- Splash and safety guard with policarbonate shield
- Pair of parallel supports with clamps
- Lubricant for slides
- Wrench set
- Instruction manual
ONLY GRINDING VERSION:
- Ø 355mm Grinding wheel complete of segments for cast iron (10 pcs.) and cutting tool
- Cooling plant complete with pump and settling tank
- Grinding wheel dresser
- Emulsifiable liquid
ONLY M VERSION:
- RP1361 CBN/PCD/ALP Milling plate
- UT1330 1/2”CBN/PCD insert tool holder
- UT1355 1/2” CBN Insert for cast iron
Specifications
Table travel
1000 mm
Max workpiece length
895 mm
Max workpiece width
355 mm
Min - Max workpiece height
125÷545 mm
Useful table surface
920x210 mm
Segmented grinding wheel diameter
355 mm (14”)
Variable head speed rotation
300÷1500 rpm
Variable table travel speed
0÷1500 mm/min
Head motor
4.0 kW (M 2.2 kW)
Table motor
0.75 kW
Fast head feed motor
0.18 kW
Coolant pump motor
0.10 kW
Dimensions (LxWxH)
1680x1140x1850 mm
Weight
1015 kg
Accessories and spare parts
PVA015
Adjustable universal fixture wit parallels
PL000A
Motor driven rotary table
UT0018
Aluminum with Pre-chamber insert tool holder
UT0023
3/8” CBN/PCD insert tool holder
UT0017
Insert tool holder with UT0014
UT0014
Replacement insert for UT0017 (10 pcs)
UT1320
3/8” CBN/PCD insert tool holder
3/8” CBN/PCD insert tool holder
UT1355
1/2” CBN Insert for cast iron
1/2” CBN Insert for cast iron
UT1356
1/2” PCD Insert for aluminium
UT1390
ALP insert tool holder for UT1392
UT1392
ALP insert for aluminum with prechambers
UT1330
1/2”CBN/PCD insert tool holder
1/2”CBN/PCD insert tool holder
UT1345
3/8” CBN Insert for cast iron
3/8” CBN Insert for cast iron
UT1346
3/8” PCD Insert for aluminium
3/8” PCD Insert for aluminium
Others
