h2Vision Based 3D Wheel Aligner Manatec STELLAR 3D Auto Boom
Price: Call
Share
| 
| 
|
Mr. Vui
0944755799
| | |
Mr. Định
0968776499
| | |
Mr. Thuyên
0963829640
| | |
Nhân Võ Đình (HCM)
0967161443
| | |
Lê Thị Thanh Hương
0979898586
Vision Based 3D Wheel Aligner Manatec STELLAR 3D ABSM Auto Boom
Automatic camera beam movement synchronized with movement of the vehicle on the lift. All measurements can be done at floor level and adjustments at any convenient level. Provision for manual height adjustment also.- Vision based 3D Imaging technology using 2 High Performance SI (Scientific Image) Camera
- Simultaneous Front and Rear wheel alignment (4×4)
- Push Pull Runout /Setback / Thrust angle compensation
- Lift level compensation at adjustment level
- Unlimited memory for vehicle specifications
- Option for selection of vehicle specification during alignment
- Power failure data protection
- Automatic tracking of Left & Right turns for Caster/Kingpin measurements
- Adjustment of Camber in wheel Jacked-up position & Toe curve measurement
- Rear Setback & Track width difference,
- Toe adjustment in single Tie rod vehicle, Vehicle geometry measurements
- Effortless Toe (Easy Toe) adjustment program
- Camber measurement at Zero Toe
- Drag link adjustment
- Toe out on Turns & Lock angle measurements
- Animated pictorial display of angles during alignment
- Zoom in option for live parameters
- Two Color Bar display for adjustment of all angles
- Quick Wheel Alignment program by user defined
- Data Manager Software for storing alignment results
- Customer Address in printout & customer data edit option
- 3-D Pictorial & Two color text printout
- Multi-lingual program & Voice prompt
- Two wheel Alignment program by fixing only front two target plate
| Measurement Parameters | Range | Accuracy |
|---|---|---|
| Camber (Front / Rear) | ± 15° 00 | ± 00° 02 |
| Caster | ± 28° 00 | ± 00° 05 |
| Kingpin Inclination | ± 25° 00 | ± 00° 05 |
| Toe (Front/Rear) | ± 20° 00 | ± 00° 02 |
| Total Toe | ± 40° 00 | ± 00° 04 |
| Toe Out on Turns | ± 20° 00 | ± 00° 02 |
| Setback (Front / Rear ) | ± 25 mm | ± 2 mm |
| Thrust Angle | ± 05° 00 | ± 00° 02 |
| Runout | ± 10° 00 | ± 00° 02 |
| Included Angle | ± 40° 00 | ± 00° 05 |
| Track width difference | ± 300 mm | ± 5 mm |
| Power Supply | 230V AC, 50Hz / 110V AC, 60Hz | |
| Power Consumption | 400W (Without Printer) | |
| Operating temperature | 0°-50°C | |
Others
